Medium Frequency Induction Coreless Melting Furnace 0.01T-15T-90T

It's mainly used for melting, heating, insulation, and energy and cupola duplex operation, characterized by high melting efficie

Usage: Melting Furnace	Type: Induction Furnace	Condition: New
Furnace Capacity: 30kg-20000kg	Power Range: 100kW-12000kW	Frequency Range: 250Hz-2500Hz
Melting Rate: 0.1t/h-17.5t/h	Power Consumption: 500kWh/t--850kWh/t	Cooling Water: 6t/h-220t/h
Input Voltage: 3N 380V/660V/950V/1050V	Transformer Capacity: 125KVA-10000KVA	Melting Material: Steel/Iron/Aluminum/Copper/Al...
Power Supply Model: Medium Frequency Power Supp...

Packaging & Delivery

Packaging Detail:	nude packaging
Delivery Detail:	20days

Specifications

Induction melting furnace 1.Power:100-12000 kW 2.Capacity:30-20000 kg 3.Melting Rate:0.1-17.5t/h 4.Frequency:250-2500Hz

                                                                           Induction melting furnace

1.Applications: used for melting stainless steel, alloy steel, carbon steel.

2.Features: fast speed of melting, saving energy, less burnt loss, pure molten liquid.

3.The aluminum frame is adopted to small capacity melting furnace with reasonable structure and small capacity, convenient installation and simple maintenance, low maintenance cost.

4.The steel structure ( frame structure and cylinder structure ) is adopted to large capacity electric furnace which is equipped with magnetic yoke. The yoke will shield and reduce magnet leakage and prevent furnace body from over-heating, thus will improve efficiency and sustain the induction coil at the same time. Such will enhance the strength and reduce noise.

5.The induction coils of fast melting furnace are double paralleled winded with prolonged coil to make sure the half capacity of furnace molten liquid can be heated by full load power output which will improve overall efficiency. Cooling system is equipped along with the induction coil prolong the lining life.

6.The inner wall of induction coil of large capacity electric furnace is cast with imported high temperature resistant insulation material to prevent of furnace lining leakage.

7.Parameter

 

Type	Power (kw)	Capacity (t)	Frequency (Hz)	Input voltage (V)	Transformer (kVA)	Melting rate (t/h)	Use power  (kw.h/t)	Cooling water (t/h)
GW 0.05-100-2.5	100	0.05	2500	380	125	0.1	850	6
GW 0.1-160-1/2.5	160	0.1	2500	380	200	0.18	850	10
GW 0.15-160-1/2.5	160	0.15	2500	380	200	0.2	800	12
GW 0.25-250-1/2.5	250	0.25	1000	380	300	0.35	760	15
GW 0.5-500-0.5	500	0.5	1000	380	600	0.8	730	20
GW 1-750-0.5/1	750	1	1000	380/660	800	1.2	650	30
GW 1.5-1000-0.5	1000	1.5	500	380/660	1200	1.58	650	35
GW 2.0-1500-0.5	1500	2.0	500	660	1800	2.58	650	50
GW 3.0-2500-0.5	2000	3.0	500	660/950	2500	3.36	650	70
GW 5.0-3500-0.5	3500	5.0	500	660/950	4000	5.0	620	90
GW 8.0-6000-0.5	6000	8.0	500	950	7000	8.3	580	120
GW 10-6500-0.5	6500	10	500	950	8000	10.3	570	150
GW 12-7500-0.25	7500	12	250	950	9000	12.2	560	160
GW 15-8000-0.25	8000	15	250	950	2*5000	12.9	560	180

It's mainly used for melting, heating, insulation, and energy and cupola duplex operation, characterized by high melting efficiency, good operating environment, the operation process is simple.

Ningbo Haishun Power Electronic Co.,Ltd. steel furnace performance and features:1, the steel furnace stability, to extend the lining life;2, low noise, good working environment;3, steel shell is solid, not easy to damage, security strong;4, the unique water-cooled cables, cable tilting furnace smallest shift, increasing its service life;5, lid makes heat loss reduced to a minimum;6, according to the different requirements of various metal smelting, well-designed;7, a variety of induction coil, a reasonable selection of copper pipe thickness and specifications, to improve energy utilization;8, the solid coil support design eliminates the possibility of inter-turn short circuit, extended induction coil using life;9, using high-performance insulation materials;10, coil covers around 50% of the yoke to reduce the magnetic flux leakage;11, at the top and bottom with cooling ring, extending the life of lining;12, the gap between the induction coil turns easy maintenance, which is conducive to the release of water vapor;13, improve the working environment, the choice of the smoke device;

Specifications

Melting furnace: 1.Energy saving 2.Low comsumption 3.High reliability&long performance 4.Remote fault diagnosis&maintenanc

Scrap Induction  Melting Furnace

Application : Ferrous metal,Nonferrous metal and stainless steel.

Application Field: Casts,melting area

Capacity : 0.01T-90Tons

Note: Equipments can be designed and produced according to the demand of the customer.

Application industry:Smelting, Casting and Holding etc.

Specifications

Medium Frequency Induction Melting Furnace 1. melting copper, aluminum, steel ect. 2. 0.1-90T capacity 3. high efficiency

0.01T~90T Medium Frequency Induction Melting Furnace

1.      Usage

The product is mainly used for melting cast iron, cast steel, stainless steel and copper, aluminum, alloy etc. It also can be used with cupola, EAF, LF for heating molten iron and molten steel.

2.      Main composed parts

(1)Furnace body

(2) Hydraulic system

(3)Operation table

(4) Frequency conversion power source

(5)Electrical heating capacitor cabinet

(6)Water temperature and pressure warner

(7)Water cooling cable

(8)Runout warner

Steel shell medium Frequency induction mlting furnace can used for melting copper, aluminum, steel ect. We can supply it with capacity from 0.1T to 90T according to customer inquiry.

8T Steel shell medium Frequency induction mlting furnace main technical parameter

Item	Unit	Parameter
Rated capacity	t	8
Max. capacity	t	10
Rated power	kw	4000
Work frequency	Hz	500
Melting rate	t/h	6
Power consumption	Kwh/t	500~550
Inductor inner dia.	mm	Φ1260
Inductor height	mm	2000
Rated copper water temperature		1100

Medium Frequency Induction Coreless Melting Furnace 0.01T-15T-90T