Fast Melting Induction Furnace 10KG-5000KG 80T

It's mainly used for melting, heating, insulation, and energy and cupola duplex operation, characterized by high melting efficie

It's mainly used for melting, heating, insulation, and energy and cupola duplex operation, characterized by high melting efficiency, good operating environment, the operation process is simple.

Ningbo Haishun Power Electronic Co.,Ltd. steel furnace performance and features:1, the steel furnace stability, to extend the lining life;2, low noise, good working environment;3, steel shell is solid, not easy to damage, security strong;4, the unique water-cooled cables, cable tilting furnace smallest shift, increasing its service life;5, lid makes heat loss reduced to a minimum;6, according to the different requirements of various metal smelting, well-designed;7, a variety of induction coil, a reasonable selection of copper pipe thickness and specifications, to improve energy utilization;8, the solid coil support design eliminates the possibility of inter-turn short circuit, extended induction coil using life;9, using high-performance insulation materials;10, coil covers around 50% of the yoke to reduce the magnetic flux leakage;11, at the top and bottom with cooling ring, extending the life of lining;12, the gap between the induction coil turns easy maintenance, which is conducive to the release of water vapor;13, improve the working environment, the choice of the smoke device;

Fast Melting Induction Furnace one power supply and twins furnace can work in the same time; double power supply and three furnace can work in the same time.

Model Number: GW--0.3T
Usage: Melting Furnace	Type: Induction Furnace	Condition: New
power: 130KW	Input Current: 208A	Supporting Transformer: 150KVA
Melting time: 30-70min	Volume of equipments: 8.5m³	Weight of equipments: 1800KG
Furnace Capacity: 300kg	Furnace maximum temperature: 1650	Output Voltage: 750V
Type: Induction Furnace

Packaging & Delivery

Packaging Detail:	Standard export packing or according to your request.
Delivery Detail:	Within 10 days after received T/T payment or 100% L/C

Specifications

1. We can offer available from stock. 2 Simple operation and excellent cost performance, 3.Equipped with distilled water

Overview and Application

 

This is the device converting three phase power current into single phase intermediate frequency current and enabling metal to produce eddy current loss through electromagnetic field induction to achieve heating and melting and is applicable to melting,heating or holding of steel,copper,iron,aluminum,zinc,tin,nickel silver and other ferrous or nonferrous metal and alloy material,as well as heating treatment prior to forging,sintering and tube-bending forming in casting and melting industries.  

 

Performances and features

 

1.Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.

2. Fast smelting with low production cost; low-pollution and environment-friendly ;

3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.

4. Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.

5. Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.

6. Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; power supply system diagnostic error function, easy maintenance.

 

Major Volumes and Technical Parameters

 

Furnace Capacity	Rating Power	Input Voltage	Input Phase	Input Current	Assorted Transformer	Output Voltage	Output Frequency	Melting Time	Volume	Weight
10-50KG	50KW	380V	3	80A	60KVA	750V	2.5KHZ	20-60Min	1.2 m³	350KG
100KG	100KW	380V	3	160A	120KVA	750V	1KHZ	20-60Min	6 m³	1500KG
150KG	100KW	380V	3	160A	120KVA	750V	1KHZ	30-70Min	6.5m³	1600KG
200KG	120KW	380V	3	192A	150KVA	750V	1KHZ	30-70Min	7.5m³	1700KG
300KG	130KW	380V	3	208A	150KVA	750V	1KHZ	30-70Min	8.5m³	1800KG
500KG	250KW	380V	3	400A	315KVA	750V	1KHZ	30-70Min	9.5m³	2300KG
600KG	350KW	380V	3	560A	400KVA	750V	1KHZ	40-80Min	11m³	2500KG
750KG	450KW	380V	3	720A	500KVA	750V	1KHZ	40-80Min	12m³	3800KG
1000KG	600KW	380V 380V-2	3/6	960A 480A	600KVA 800KVA	750V 1300V	0.8KHZ	50-90Min	13m³	4500KG
1250KG	800KW	380V 380V-2	3/6	1280A 640A	800KVA 1250KVA	750V 1300V	0.8KHZ	50-90Min	14m³	5000KG
1500KG	1000KW	380V 380V-2	3/6	1600A 800A	1250KVA 1500KVA	750V 1300V	0.8KHZ	50-90Min	15m³	5500KG
2000KG	1250KW	660V 380V-2	3/6	1120A 1000A	1500KVA 1800KVA	1300V	1300V	50-90Min	17m³	6000KG
3000KG	1500KW	660V 380V-2	3/6	1350A 1200A	1800KVA 2000KVA	1300V	1300V	60-100Min	20m³	7000KG
5000KG	2500KW	1000V 660V-2	3/6	2000A 1120A	3000KVA 3500KVA	1300V	1300V	60-100Min	23m³	8500KG

 

1    Melting time and power consumption/ton is important to equipment power, raw material shape and weight, operator’s skill level and other elements;2     Power parameters shall be subject to steel melting; lower power is required by melting of copper, aluminum, zinc or other material with low melting point; please consult Hengyang Technical Department for specific data;3     Configuration: an intermediate frequency power supply, a capacitor cabinet, an overturn control cabinet, body, two sets of reduction boxes and supports, two water cooling cables, etc.;4     The above data is of standard model. We also provide customized non-standard products with different power or melting speed.

We have stocks so we can arrange for the delivery very fast!

 

We uphold "first quality,first customers,first service"

Sincerely provide service for you! 

Fast Melting Induction Furnace 10KG-5000KG 80T